FLOW PATTERN TESTER -500
FLOW PATTERN TESTER -500
FPT500 is non-contaminating fog generator that can produce very high purity fog for airflow visualization test in clean rooms & high concentration of water aerosols (Atomized particle size 1-10μm on 80%) and which will leave no residue contaminants when droplet of water evaporates in side cleanroom. This product is widely accepted to Pharmaceutical, Healthcare and Semiconductor industries.
Features and Benefits :
- Portable and exquisite.
- Used for ISO-5 to ISO-8 in Cleanroom, vial tunnels, LAFW, BSC, Isolators, etc.
- Very insignificant warm up time required i.e. <1 minute.
- Easy to produce curtain-shaped fog by using fog wand which helps to check laminar air flow pattern by covering maximum area of HEPA filter at a time.
- We can use maximum Extendable flexible grooved milky white hosepipe of 10ft.
- Low noise i.e. ≤ 50dB
- Ultrapure foggers with absolute non-contamination. No emission of toxic gases.
- Cool Fog output.
- No residual.
- Fog is good controllability.
- Air Volume is adjustable.
- Visual indicators for Airflow, Atomization & Low water level.
- Auto Atomization switch off / cut off if water level is low.
- Water tank volume : 5 Liters
- Water capacity Max. fill level : 3.5 Liters
- Fog medium Impedance : 16 to 64 MΩ Distilled Water or
- Filtered WFI (i.e. Water for Injection)
- Fog medium conductivity : 0.15 – 1.00 ms/cm
- Fog output rate : 0.95 m3/min
- Aerosol Size Distribution : 1 -10 μm
- Continual fogging times : 40 Minutes
- Water Consumption : 25 to 70 ml/Min.
- Material of Construction : Stainless Steel SS304
| PARAMETER | FPT 500 | FPT 700 |
| External Power Supply | AC220V 50Hz | AC220V 50Hz |
| Water Tank Volume | 5 Liters | 7 Liters |
| Water capacity optimum level | 25 Liters | 45 Liters |
| Water capacity Max. fill level | 3.5 Liters | 5 Liters |
| Dimension | 350mmx230mmx330mm | 50cmx26cmx34cm |
| Weight of Empty FPT | 9.2KG | 20KG(without water) |
| Input Voltage | DC 45V | DC 45V |
| Rated Power Consumption | 216 W | 216 W |
| Fog medium impedance | 16 to 640 Distilled water or Filtered WFI | 16 to 640 Distilled water or Filtered WFI |
| Fog medium conductivity | 0.15-1.00ms/cm | 0.15-1.00ms/cm |
| Fog output rate | 0.95m³/min | 0.95m³/min |
| Aerosol Size Distribution | 1-10μm | 1-10μm |
| Continual fogging times | 30 minutes | 25 minutes |
| Water Consumption | 25 to 30ml/min | 200 to 300ml/min |
| Material of Construction | Stainless Steel SS304 | Stainless Steel SS304 |