FLOW PATTERN TESTER -700

FPT – 700 is non-contaminating fog generator that can produce very high purity fog for airflow visualization test in clean rooms & high concentration of water aerosols (Atomized particle size 1-10μm on 80%) and which will leave no residue contaminants when droplet of water evaporates in side cleanroom. This product is widely accepted to Pharmaceutical, Healthcare and Semiconductor industries.

DOWNLOAD PDF
REQUEST A QUOTE

Features and Benefits

  • Portable and exquisite.
  • Used for ISO-5 to ISO-8 in Cleanroom, vial tunnels, LAFW, BSC, Isolators, etc.
  • Very insignificant warm-up time required (i.e. <1 minute).
  • Easy to produce curtain-shaped fog by using fog wand, which helps check laminar air flow pattern by covering the maximum area of the HEPA filter at a time.
  • Can use a maximum extendable flexible grooved milky white hosepipe of 10ft.
  • Low noise (i.e. ≤ 50dB).
  • Ultrapure foggers with absolute non-contamination; no emission of toxic gases.
  • Cool fog output.
  • No residual.
  • Fog has good controllability.
  • Air volume is adjustable.
  • Visual indicators for airflow, atomization & low water level.
  • Auto atomization switch off/cut off if water level is low.
  • Water tank volume: 5 liters.
  • Water capacity max. fill level: 3.5 liters.
  • Fog medium impedance: 16 to 64 MΩ (Distilled Water or Filtered WFI, i.e., Water for Injection).
  • Fog medium conductivity: 0.15 – 1.00 ms/cm.
  • Fog output rate: 0.95 m³/min.
  • Aerosol size distribution: 1 -10 μm.
  • Continual fogging times: 40 minutes.
  • Water consumption: 25 to 70 ml/min.
  • Material of construction: Stainless Steel SS304.

Applications

  • Cleanroom Laminar Air Flow Testing.
  • Laminar Air Flow Workstations Testing.
  • Airflow Balance Testing.
  • Pressure balancing of inside & outside of the cleanroom testing.
  • Chemical processing equipment exhausts system testing.
  • Personal safety evacuation system testing.
  • Wet cleaning exhaust system optimization.
Category:
FLOW PATTERN TESTER -700

FLOW PATTERN TESTER -700

FPT – 700 is non-contaminating fog generator that can produce very high purity fog for airflow visualization test in clean rooms & high concentration of water aerosols (Atomized particle size 1-10μm on 80%) and which will leave no residue contaminants when droplet of water evaporates in side cleanroom. This product is widely accepted to Pharmaceutical, Healthcare and Semiconductor industries.

DOWNLOAD PDF
REQUEST A QUOTE

Features and Benefits

  • Portable and exquisite.
  • Used for ISO-5 to ISO-8 in Cleanroom, vial tunnels, LAFW, BSC, Isolators, etc.
  • Very insignificant warm-up time required (i.e. <1 minute).
  • Easy to produce curtain-shaped fog by using fog wand, which helps check laminar air flow pattern by covering the maximum area of the HEPA filter at a time.
  • Can use a maximum extendable flexible grooved milky white hosepipe of 10ft.
  • Low noise (i.e. ≤ 50dB).
  • Ultrapure foggers with absolute non-contamination; no emission of toxic gases.
  • Cool fog output.
  • No residual.
  • Fog has good controllability.
  • Air volume is adjustable.
  • Visual indicators for airflow, atomization & low water level.
  • Auto atomization switch off/cut off if water level is low.
  • Water tank volume: 5 liters.
  • Water capacity max. fill level: 3.5 liters.
  • Fog medium impedance: 16 to 64 MΩ (Distilled Water or Filtered WFI, i.e., Water for Injection).
  • Fog medium conductivity: 0.15 – 1.00 ms/cm.
  • Fog output rate: 0.95 m³/min.
  • Aerosol size distribution: 1 -10 μm.
  • Continual fogging times: 40 minutes.
  • Water consumption: 25 to 70 ml/min.
  • Material of construction: Stainless Steel SS304.

Applications

  • Cleanroom Laminar Air Flow Testing.
  • Laminar Air Flow Workstations Testing.
  • Airflow Balance Testing.
  • Pressure balancing of inside & outside of the cleanroom testing.
  • Chemical processing equipment exhausts system testing.
  • Personal safety evacuation system testing.
  • Wet cleaning exhaust system optimization.
Category:

Description

AeroTrak™+ Portable Airborne Particle Counters (APCs) are ideal for all industries for cleanroom certification, monitoring and specialized tasks including gas testing and filter scanning. Engineered for you, they provide the newest features you’ve been asking for in a portable particle counter: Data integrity (including Annex 1) Communication options Intuitive GUI — requires no manuals to operate, significantly reducing the chance for user error and simplifying monitoring for environmental contamination These features lead to a better user experience and easy compliance. Built in standards for configuration and reports to meet the standards driving the market include: ISO 14644-1:2015 – Cleanrooms and associated controlled environments ISO 21501-4:2018 – Calibration standards EU GMP Annex 1 (2008 and 2022) – Good Manufacturing Practice: Manufacture of Sterile Medical Products China GMP Standalone or as part of an easy to use complete monitoring system, AeroTrak™+ Portable Particle Counter A100 Series meets your needs. Click here to view a series of Videos & Quick Tips.

Reviews

There are no reviews yet.

Be the first to review “FLOW PATTERN TESTER -700”

Your email address will not be published. Required fields are marked *

Related products

Let's Get In Touch

Your laboratory instruments should serve you, not the other way around. We're happy to help you.